HIKOKI WR 14VE 취급 지침 매뉴얼 - 페이지 15

{카테고리_이름} HIKOKI WR 14VE에 대한 취급 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKOKI WR 14VE 20 페이지.

Changing the rotation direction

The anvil rotates clockwise (viewed from the rear

side) by pushing the R-side of the selector button.

The L-side of the selector button is pushed to turn the

anvil counterclockwise (See Fig. 4)

(The

and

Switch operation (Fig. 5)

○

When the switch trigger is depressed, the tool rotates.

When the trigger is released, the tool stops.

○

The rotational speed can be controlled by varying

the amount that the switch trigger is pulled. Speed

is low when the switch trigger is pulled slightly and

increases as the switch trigger is pulled more.

Switching tightening mode (see Fig. 6)

Each press of mode switch will change the

impact rate. Switch must be switched OFF when

conducting this operation. Use Low or Medium for

light tasks, and High or Maximum for heavy tasks.

marks are provided on the body).

mark

Trigger switch

Switch trigger

Mode indicator lamp

Mode switch

Low Medium

English

mark

Selector button

Fig. 4

Fig. 5

Switch

trigger

High

Maximum

Fig. 6