Gamma X-Stringer XLT 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Gamma X-Stringer XLT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma X-Stringer XLT 20 페이지. Electronic stringing machine

POWER CONNECTION & CONTROLS

Instructions for Power Connection and Controls

CAUTION ! Before connecting to the power supply, check the voltage source that the

machine is being connected to. The acceptable range of input voltages for this ma-

chine is between 100 V and 240 V @ 50 to 60 Hz. If you have any questions regarding

the input voltage supply for your area, please ask your electric utility company.

To install the power cord, insert the female end of the power cord into the AC Adapter and

then insert the female end of the cord from the AC Adapter into the A/C Power Cord Socket

"B" located on the back panel of the tensioner. Plug the male end of the power cord into a

grounded power outlet. When using extension cords, use grounded heavy duty extension

cords rated for 15 AMP service.

To connect the foot pedal switch, insert the male pin at the end of the foot pedal switch cord

into the Foot Pedal Switch Receptacle "C" located on the back panel of the tensioner.

Switch on the machine by pressing the Lighted On-Oﬀ Power Switch on the back panel. At

start-up, the LED will display a countdown from "9.0" to "0.0" while the machine performs a

self diagnostics check at start-up.

Back Panel Features

A -

B -

C -

Front Panel Features

A - String Gripper

B - Tension Lever

C - Control Panel

D - LED Display

Power On/Oﬀ Switch

A/C Power Cord Socket

Foot Pedal Switch Receptacle