HIKVISION DS-2CE16D8T-IT3 사용자 설명서 - 페이지 8
{카테고리_이름} HIKVISION DS-2CE16D8T-IT3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE16D8T-IT3 15 페이지. Turret cameras turbo hd d8t series
HIKVISION DS-2CE16D8T-IT3에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 사용자 설명서 (15 페이지)
페이지 인쇄
Note:
Drill the cable hole in the center of the drill template,
when adopting the ceiling outlet to route the cable.
Secure the mounting base to the ceiling with the
5.
supplied screws.
Figure 2-12 Fix the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
Route the cables through the cable hole, or the side
6.
opening.
Secure the camera on the mounting base.
7.
Connect the corresponding cables, such as power
8.
cord, and video cable.
Power on the camera to check whether the image
9.
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Tilt Position
[0°to75°]
1). Hold the camera body and rotate the enclosure
to adjust the pan position [0° to 360°].
Move the camera body up and down to adjust
2).
the tilt position [0° to 75°].
Rotate the camera body to adjust the rotation
3).
position [0° to 360°].
2.3 Installation of Type I and Type II Camera
2.3.1 Ceiling/Wall Mounting with Junction Box
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Figure 2-13 Secure the Camera
Figure 2-14 3-axis Adjustment
Expansion Bolts
Fixing Screw
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]