HIKVISION DS-2CE16D8T-IT3 사용자 설명서 - 페이지 9

{카테고리_이름} HIKVISION DS-2CE16D8T-IT3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2CE16D8T-IT3 15 페이지. Turret cameras turbo hd d8t series
HIKVISION DS-2CE16D8T-IT3에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄
HIKVISION DS-2CE16D8T-IT3 사용자 설명서

Type I Camera

Figure 2-15 Drill Template of the Junction Box
Note:
Drill the cable hole, when adopting the ceiling
outlet to route the cable.
3. Take apart the junction box, and align the screw
holes of the turret camera's mounting base with
those on junction box's cover.
4. Fix the mounting base on junction box's cover by
supplied screws.
5. Secure the junction box's body with supplied screws
on the ceiling/wall.
6. Combine the junction box's cover with the junction
box's body.
Junction Box Body
7. Repeat steps 6 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to install the camera to the
junction box.
2.3.2 Wall Mounting
Before you start:
You need to purchase a wall mounting bracket
separately.
Steps:
1.
Drill four screw holes in the wall according to the
holes of the bracket.
2. Install the bracket to the wall by aligning the four
screw holes of the bracket with expansion screws on
the wall.
3. Secure the bracket with four hex nuts and washers.
Type I Camera
4. Install the mounting base of the turret camera to
the wall mounting bracket, and secure them with
supplied screws.
Figure 2-16 Fix the Junction Box
Figure 2-17 Install the Bracket
Junction Box Body
Junction Box Cover