CORNING UAT3 사용 설명서 - 페이지 7

{카테고리_이름} CORNING UAT3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING UAT3 18 페이지.

CAUTION: The tool must be driven with the handle. do not

pull the tool or attempt to drive it with power tools.

5.3

To initially prepare the tool for use:

a. Use the thumbscrew to open the tool to at least 0.25 in more

than the diameter of the tube to be accessed (Figure 7).

NOTE: In the following steps, a recommended blade setting is

referenced. In most cases you will have to make adjustments to

the blade setting while slitting the buffer tube to get the desired

depth of cut.

b. For the tool to operate correctly, the blade depth adjustment

must be made (or verified) prior to accessing any tube.

Determine the buffer tube diameter using either Table 1 or

the plastic gauge card supplied with the tool kit.

Standard Recommended Procedure 004-074 | Issue 12 | May 2017 | Page 7 of 18

Drive shaft

Figure 6

Figure 7