Garmin TR-1 Gold 설치 지침 - 페이지 3

{카테고리_이름} Garmin TR-1 Gold에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin TR-1 Gold 4 페이지. Throttle actuator
Garmin TR-1 Gold에 대해서도 마찬가지입니다: 소유자 매뉴얼 (38 페이지), 기본 작동 매뉴얼 (9 페이지), 빠른 참조 (2 페이지), 설치 지침 (7 페이지), 소유자 핸드헬드 빠른 참조 (2 페이지)

Step Three:

Near the left end of the carburetor

there is a shaft with a nut on

it. This is the butterfly shaft.

Remove the nut and lock nut. Be

careful not to drop them in side

the cowl.

Step Two:

Use the #10 screw provided with the

actuator to replace the screw you just

removed and attach the throttle actuator

assembly (item 1) as shown. Keep both

washers on the screw head side of the

air horn. Apply a little thread lock to the

screw and tighten it.

Step Four:

Install the carburetor bell crank

lever on the shaft as shown.

The little screw head will be

on the near side. The string

connecting it to the actuator

motor should enter from the

back. Tighten the nut.