Garmin TR-1 Gold Installation Instructions - Page 3
Browse online or download pdf Installation Instructions for Marine GPS System Garmin TR-1 Gold. Garmin TR-1 Gold 4 pages. Throttle actuator
Also for Garmin TR-1 Gold: Owner's Manual (38 pages), Basic Operation Manual (9 pages), Quick Reference (2 pages), Mounting Instructions (7 pages), Owner Handheld Quick Reference (2 pages)
Print Page
Step Three:
Near the left end of the carburetor
there is a shaft with a nut on
it. This is the butterfly shaft.
Remove the nut and lock nut. Be
careful not to drop them in side
the cowl.
Step Two:
Use the #10 screw provided with the
actuator to replace the screw you just
removed and attach the throttle actuator
assembly (item 1) as shown. Keep both
washers on the screw head side of the
air horn. Apply a little thread lock to the
screw and tighten it.
3
Step Four:
Install the carburetor bell crank
lever on the shaft as shown.
The little screw head will be
on the near side. The string
connecting it to the actuator
motor should enter from the
back. Tighten the nut.