Garmin TR-1 Gold Installatie-instructies - Pagina 3

Blader online of download pdf Installatie-instructies voor {categorie_naam} Garmin TR-1 Gold. Garmin TR-1 Gold 4 pagina's. Throttle actuator
Ook voor Garmin TR-1 Gold: Gebruikershandleiding (38 pagina's), Basishandleiding (9 pagina's), Snelle referentie (2 pagina's), Montage-instructies (7 pagina's), Eigenaar Handheld Snelle referentie (2 pagina's)

Step Three:

Near the left end of the carburetor

there is a shaft with a nut on

it. This is the butterfly shaft.

Remove the nut and lock nut. Be

careful not to drop them in side

the cowl.

Step Two:

Use the #10 screw provided with the

actuator to replace the screw you just

removed and attach the throttle actuator

assembly (item 1) as shown. Keep both

washers on the screw head side of the

air horn. Apply a little thread lock to the

screw and tighten it.

Step Four:

Install the carburetor bell crank

lever on the shaft as shown.

The little screw head will be

on the near side. The string

connecting it to the actuator

motor should enter from the

back. Tighten the nut.