Kohler BodySpa K-1000 설치 지침 매뉴얼 - 페이지 11
{카테고리_이름} Kohler BodySpa K-1000에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler BodySpa K-1000 28 페이지. Tower custom hydro-massage system
Kohler BodySpa K-1000에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (48 페이지)
페이지 인쇄
CAUTION: Risk
concealed leakage. The application of silicone
sealant as instructed is essential to ensure a
correct, watertight installation. Follow all sealing
instructions exactly.
Apply a continuous bead of silicone sealant to the inside
of the wall jamb where it contacts the footbath, as shown.
Repeat for the other wall jamb.
B. INSTALL THE CENTER EXPANDERS
Remove and discard the thread caps from the center
expanders. Fit a center expander into one of the wall
jambs, as shown. The projection on the center expander
fits behind the footbath locating pin, as shown. Push the
bottom of the center expander all the way into the wall
jamb. Plumb the center expander by turning the top
buttonhead screw in or out with the balldriver tool.
Check for plumb with a level. When the center expander
is plumb, turn in the center buttonhead screw until you feel
it just contact the wall jamb. Recheck for plumb, then
secure the center expander to the wall jamb with three
3-1/2" stainless steel flathead screws (provided).
Remove the protective tape from the inside of the wall
jamb. Do not remove the tape from the outside of the wall
jamb at this time.
Repeat for the other center expander.
Complete the finished wall according to the following
instructions.
Kohler Co., Kohler WI U.S.A.
of
property
damage
and
TOP VIEW
INSIDE OF
WALL JAMB
Apply
Silicone
Sealant
Locating Pin
Center
Expander
TOP VIEW
Center Expander
3-1/2"
Stainless Steel
Flathead Screw
Footbath
11
Wall
Jamb
Top
Buttonhead
Screw
Locating
Pin
116290-2-
Wall
Jamb
AB