Kohler BodySpa K-1000 설치 지침 매뉴얼 - 페이지 21

{카테고리_이름} Kohler BodySpa K-1000에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler BodySpa K-1000 28 페이지. Tower custom hydro-massage system
Kohler BodySpa K-1000에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (48 페이지)

페이지 인쇄

Securely handtighten the tower union nut to the mounting

frame union. Be sure the union O-ring is in place.

Carefully pivot the tower closed. Line up the holes at the

top and bottom right corners of the tower with the slotted

holes in the mounting frame. Thread a 3/8" bolt through

the mounting frame and into the tower at the top and

bottom. Tighten the bolts securely, but do not overtighten.

Water testing and inspection is required later. You may

want to only install and handtighten one of the required

bolts at this time. Both bolts will need to be securely

tightened later.

12. COMPLETE INSTALLATION

A. INSTALL HANDLES AND SPOUT

CAUTION: Risk of property damage. The valve,

spout, and other plumbing fittings must be

adequately sealed to prevent water leakage

behind the finished wall.

Install the faucet handles and spout according to the

manufacturer's instructions. Seal around the plumbing

fittings.

Kohler Co., Kohler WI U.S.A.

Mounting

Frame

Union

To Improve Clarity, the Door

Enclosure is not Shown.

Tower

Union

Nut

Bolt

116290-2-