CP Electronics MWS3A-AT-PRM 제품 설명서 - 페이지 7

{카테고리_이름} CP Electronics MWS3A-AT-PRM에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS3A-AT-PRM 17 페이지. Rd ceiling microwave presence detector-switching
CP Electronics MWS3A-AT-PRM에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄

Step 1: Set channel addresses and channel load type

The Sensor has one output channel:



Channel 1 - Switched Output

and one input channel:



Channel 3 - Microwave Sensor

To relate the function of different channels it is necessary

to set the addresses correctly. For example, a scene

select message sent from a device with a Local Code of 1

will only be actioned by devices that also have a Local

Code of 1.

To program the settings for a specific channel on the

Sensor you must specify the appropriate channel number

(i.e.1 to 3) using the programming device.

If no channel number (or channel 0) is specified, all

channels will be set to the same address.

The output channel also has a Circuit number. This allows

different physical channels to be linked and controlled as

a single Circuit.

Basic programming