CP Electronics MWS3A-DD-LV 제품 설명서 - 페이지 2

{카테고리_이름} CP Electronics MWS3A-DD-LV에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS3A-DD-LV 13 페이지. Ceiling microwave presence detector - dali / dsi 12-24v ac/dc
CP Electronics MWS3A-DD-LV에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄

Detection diagram

Ideal for large office or classroom

Ideal for open plan areas and offices

Sensor functionality

Detection Mode

The Detection Mode for both output Channels 1 and 2 can be set to behave in Presence or Absence mode:

 Presence When movement is detected the load will automatically turn on. When the area is no longer occupied the

load will automatically switch off after an adjustable time period.

 Absence The load is manually switched on. When the area is no longer occupied the load will automatically switch

off after the adjustable time period has elapsed.

In either case, sensitivity to movement of the Microwave sensor can be adjusted using the Sensitivity parameter.

HINT: To assist in setting the Sensitivity, turn on the Walk Test LED which will flash red when movement is detected.

Switch Level On/Off

Occupancy detection can be made dependant on the ambient light level using the Lux On Level and Lux Off Level

parameters.

Maintained Illuminance (daylight harvesting)

The detector measures the overall light level in the detection area and calculates the correct output for the luminaires, to

achieve a preset lux level (maintained illuminance or daylight harvesting).

Ideal for corridor or aisle applications

Note. If the range is compromised by the ceiling construction /

material. Add the supplied 20mm spacer ring. See page 4 for

fitting details.