CP Electronics MWS3A-DD-LV 제품 설명서 - 페이지 6

{카테고리_이름} CP Electronics MWS3A-DD-LV에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS3A-DD-LV 13 페이지. Ceiling microwave presence detector - dali / dsi 12-24v ac/dc
CP Electronics MWS3A-DD-LV에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄
CP Electronics MWS3A-DD-LV 제품 설명서
Two channel, individual switches
Functions: Switches both channels with occupancy. Maintains illuminance, dims and switches the dimming channel
using optional single position retractive switch (switch 2). Switches the switching channel using the optional single
position retractive switch (switch 1).
Configured to presence detection: Turns on automatically with occupancy. Maintains illuminance (dimming channel
only). Press and release switch to toggle output. Press and hold switch to dim up and down (reverses direction with
each press). Turns off after occupancy.
Configured to absence detection: Press and release switch to turn on. Maintains illuminance (dimming channel only).
Press and release switch to turn off. Press and hold switch to dim up and down (reverses direction with each press).
Turns off after occupancy.
6.2 Two Channel, individual switches
Channel mode: Set to "Switch and dim separate"
OPTION 3(A): USING 2 MOMENTARY PUSH TO MAKE SWITCHES TO PROVIDE SWITCHED OUTPUT TO A
NON-DIMMING LUMINAIRE AND SWITCHED / DIMMING OUTPUT TO A DIMMING LUMINAIRE OVER 2 CHANNELS
Switch mode: Set to "1 position switch separate"
INPUT & SWITCH
CONNECTIONS
-
DC Supply
OR
11.5VDC - 36VDC
+
LOAD CONNECTIONS
-DD-LV
-DD-LV/GOLD
Two channel, common switch
LOAD
Functions: Switches both channels with occupancy. Maintains illuminance, dims and switches the dimming channel
using optional centre biased retractive switch .
COM
OUT
Configured to presence detection: Turns on automatically with occupancy. Maintains illuminance (dimming channel
+
only). Press and release down switch to turn off. Press and release up switch to turn back on. Press and hold up switch
to dim up, press and hold down switch to dim down. Turns off after occupancy. Channel 1 does not operate with switch.
Configured to absence detection: Press and release up switch to turn on. Maintains illuminance (dimming channel
only). Press and release down switch to turn off. Press and hold up switch to dim up, press and hold down switch to dim
down. Turns off after occupancy. Channel 1 does not operate with switch.
Channel mode: Set to "Switch and dim separate"
6.1 Single channel dimming
Switch mode: Set to "2 position switch separate"
6.3 Two Channel, common switch
OPTION 2: USING A CENTRE BIASED RETRACTIVE SWITCH TO PROVIDE
SWITCHED AND DIMMING OUTPUT (STANDARD CONFIGURATION)
OPTION 3(B): USING A CENTRE BIASED RETRACTIVE SWITCH TO PROVIDE SWITCHED OUTPUT TO A
NON-DIMMING LUMINAIRE AND SWITCHED / DIMMING OUTPUT TO A DIMMING LUMINAIRE OVER 2 CHANNELS
INPUT & SWITCH
CONNECTIONS
-
DC Supply
OR
11.5VDC - 36VDC
+
-
DC Supply
11.5VDC - 36VDC
+
6
AC Supply
10VAC - 26.5VAC
INTERNAL
RELAY
AC Supply
10VAC - 26.5VAC
AC Supply
OR
10VAC - 26.5VAC
COM
DIM-
OUT
DIM+
+
SW1/UP
SW2
DOWN
EBDSPIR-DD-LV SENSOR
LOAD CONNECTIONS
-DD-LV/OC
LOAD
COM
OUT
+
COM
DIM-
OUT
DIM+
+
COM
SW1/UP
DIM-
OUT
DIM+
SW2
DOWN
+
SW1/UP
SW2
DOWN
EBDSPIR-DD-LV SENSOR
EBDSPIR-DD-LV SENSOR
DIMMING
BALLAST
DIMMING LUMINAIRE
(DSI or DALI)
SWITCH 1 - MOMENTARY
PUSH TO MAKE SWITCH
mandatory for absence detection
SWITCH 2 - MOMENTARY
PUSH TO MAKE SWITCH
mandatory for absence detection
INTERNAL OPEN
COLLECTOR
TRANSISTOR
DIMMING
BALLAST
DIMMING LUMINAIRE
DIMMING
(DSI or DALI)
BALLAST
DIMMING LUMINAIRE
(DSI or DALI)
CENTRE BIASED
RETRACTIVE SWITCH
Optional for presence,
CENTRE BIASED
mandatory for absence detection
RETRACTIVE SWITCH
Optional for presence,
mandatory for absence detection
Optional for presence,
Optional for presence,