CP Electronics MWS3A-DD-LV 제품 설명서 - 페이지 4

{카테고리_이름} CP Electronics MWS3A-DD-LV에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS3A-DD-LV 13 페이지. Ceiling microwave presence detector - dali / dsi 12-24v ac/dc
CP Electronics MWS3A-DD-LV에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄
CP Electronics MWS3A-DD-LV 제품 설명서
Installation
The MWS3A-DD-LV is designed to be mounted using either:
Flush fixing, or
Surface fixing, using the optional Surface Mounting Box (part no. MWS3A-DBB).
Both methods are illustrated below.
Warning - be careful bending springs when mounting unit.
Flush fixing
1
2
Hole Ø74mm
If the range is compromised by the
ceiling construction / material. Add the
supplied 20mm spacer ring.
Surface fixing
1
2
Hole Ø30mm
MAX
Head locking
1
Remove metal
locking clip from
rear of unit.
Wire stripping details
4
3
3
2
Adjust head to
required position.
Push clip into position
shown below to lock
head.
To remove clip, lever
out with a small
screwdriver.
4
Attach cable clamp
4
Important
Ensure that the cables are formed as shown
before affixing the cable clamp. The clamp
MUST clamp the outer sheath(s) only.
Bend cores as shown.
5