Dell PowerEdge 2400 설치 매뉴얼 - 페이지 4
{카테고리_이름} Dell PowerEdge 2400에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2400 8 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2400에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (8 페이지), 랙 설치 지침 (32 페이지), 업데이트 (2 페이지), 활성화 매뉴얼 (8 페이지), 업데이트 매뉴얼 (2 페이지), 매뉴얼 (15 페이지)
페이지 인쇄
1-2
Dell PowerEdge 2400 Systems — Installing Redundant Power Supplies
4.
Slide the top cover about 2 centimeters (cm) (about half an inch) toward the front
of the computer and lift the cover away.
5.
Disconnect the power cable harness from the POWER connector on the small
computer system interface (SCSI) backplane board, the POWER1 connector on
the system board, and the diskette drive and other drives in the external drive
bays.
When you disconnect a cable connector from the SCSI backplane board and the
system board, press the plastic latch on one side of the connector to release it.
6.
Remove the two screws on either side of the power supply (see Figure 1-2).
Screws (2)
Top cover