Dell PowerEdge 2400 Manual de instalação - Página 4

Procurar online ou descarregar pdf Manual de instalação para Servidor Dell PowerEdge 2400. Dell PowerEdge 2400 8 páginas. Wake-on-lan (wol) support on dell servers
Também para Dell PowerEdge 2400: Manual de instalação (20 páginas), Manual de instalação (8 páginas), Instruções de instalação do bastidor (32 páginas), Atualização (2 páginas), Manual de ativação (8 páginas), Manual de atualização (2 páginas), Manual (15 páginas)

1-2

Dell PowerEdge 2400 Systems — Installing Redundant Power Supplies

Slide the top cover about 2 centimeters (cm) (about half an inch) toward the front

of the computer and lift the cover away.

Disconnect the power cable harness from the POWER connector on the small

computer system interface (SCSI) backplane board, the POWER1 connector on

the system board, and the diskette drive and other drives in the external drive

bays.

When you disconnect a cable connector from the SCSI backplane board and the

system board, press the plastic latch on one side of the connector to release it.

Remove the two screws on either side of the power supply (see Figure 1-2).

Screws (2)

Top cover