Dell PowerEdge 2400 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerEdge 2400. Dell PowerEdge 2400 8 pagina's. Wake-on-lan (wol) support on dell servers
Ook voor Dell PowerEdge 2400: Installatiehandleiding (20 pagina's), Installatiehandleiding (8 pagina's), Instructies voor installatie van het rek (32 pagina's), Update (2 pagina's), Activeringshandleiding (8 pagina's), Handleiding bijwerken (2 pagina's), Handmatig (15 pagina's)

1-2

Dell PowerEdge 2400 Systems — Installing Redundant Power Supplies

Slide the top cover about 2 centimeters (cm) (about half an inch) toward the front

of the computer and lift the cover away.

Disconnect the power cable harness from the POWER connector on the small

computer system interface (SCSI) backplane board, the POWER1 connector on

the system board, and the diskette drive and other drives in the external drive

bays.

When you disconnect a cable connector from the SCSI backplane board and the

system board, press the plastic latch on one side of the connector to release it.

Remove the two screws on either side of the power supply (see Figure 1-2).

Screws (2)

Top cover