Panasonic WVNS954 - NETWORK CAMERA 사용 설명서 - 페이지 6
{카테고리_이름} Panasonic WVNS954 - NETWORK CAMERA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNS954 - NETWORK CAMERA 21 페이지. Ip video cameras
Panasonic WVNS954 - NETWORK CAMERA에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 설치 매뉴얼 (31 페이지), 통합 참고 사항 (8 페이지), 사용 설명서 (21 페이지)
페이지 인쇄
y AUX buttons (*2)
These buttons will be displayed only when "Terminal
alarm 3" is selected for "AUX output" on the setup
menu. ( Setup Instructions)
: The letters "OPEN" on the button will turn
green and the status of AUX connector will
be open.
: The letters "CLOSE" on the button will turn
green and the status of the AUX connector
will be closed.
u
[SD] button (manual SD recording
button) (*2)
This button will be displayed only when "Manual" is
selected for "Save trigger" on the setup menu.
( Setup Instructions)
Click this button to manually record images on the
SD memory card. Refer to page 10 for descriptions
of how to manually record images on the SD memo-
ry card.
i
[List] button (*1)
This button will become available only when "ON" is
selected for "Save logs" on the setup menu (
Setup Instructions).
When this button is clicked, the log list will be dis-
played and images saved on the SD memory card
can be played.
Refer to page 17 for further information about the log
list and of how to play images on the SD memory
card.
o ZOOM buttons (*2)
: Click this button to adjust the zoom ratio
to the WIDE side.
: Click this button to set the zoom ratio to
x1.
: Click this button to adjust the zoom ratio
to the TELE side.
!0 Focus buttons (*2)
: Click this button to adjust the focus auto-
matically.
: Click this button to adjust the focus to the
NEAR side.
: Click this button to adjust the focus to the
FAR side.
!1 AUTO MODE (*2)
Select an operation from the pull-down menu and
click the [START] button. The selected operation will
start.
6
Click the [STOP] button to stop the operation.
The selected operation will stop when the camera
(panning/tilting/zooming/focusing) is operated or
when an action that is to be taken according to the
settings for "Self return" ( Setup Instructions) or for
"Camera motion on alarm" ( Setup Instructions)
starts.
Auto track: Automatically tracks an object in the
shooting area.
Notes:
• The auto track function works only when the size of
the object is larger than 1/48 of the main area and
also the contrast ratio between the object and the
background is more than 5 %.
• The auto track function of this camera is the simpli-
fied function that tracks a moving object in the shoot-
ing area. It may be impossible to track a moving
object in the following cases:
• When there are multiple moving objects in the
shooting area
• When the contrast ratio between a moving object
and the background is almost none
• When an object moves quickly
• When a moving object is too small or too big
• When the shooting area is dark
• When there is a flicker in the shooting area
• When the zoom ratio is set to the TELE side, it
may be difficult to obtain accuracy with the auto
tracking function. It is recommended to use the
auto tracking function with setting the zoom ratio
to the WIDE side.
Auto pan: Automatically pans between the left position
and the right position set in advance ( Setup
Instructions).
Even when the camera is operated for zooming or
focusing, the camera continues panning. (However,
panning will stop when the zoom button (x1) is
clicked.)
Preset sequence: Automatically moves to the preset
positions ( Setup Instructions) orderly (start from
the lowest preset position number).
360 map-shot: Moves 45° horizontally at a time and
repeats 7 times to shoot images of each 45° position
(45° x 8 = 360°), and then displays 8 thumbnail
images of each 45° position (45° x 8 = 360°) on a
newly opened window. When a thumbnail image is
clicked, the camera moves to the respective position
and live images will be displayed on the "Live" page.