Panasonic WVNS954 - NETWORK CAMERA 사용 설명서 - 페이지 8
{카테고리_이름} Panasonic WVNS954 - NETWORK CAMERA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNS954 - NETWORK CAMERA 21 페이지. Ip video cameras
Panasonic WVNS954 - NETWORK CAMERA에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 설치 매뉴얼 (31 페이지), 통합 참고 사항 (8 페이지), 사용 설명서 (21 페이지)
페이지 인쇄
!7
Full screen button
Images will be displayed on a full screen. To return
to the "Live" page, press the [Esc] key. When dis-
playing images on a full screen, the audio transmis-
sion button will become unavailable.
!8
One shot button
Click this button to take a picture (a still picture). The
picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-
up menu will be displayed. The displayed image can
be saved on the PC by selecting "Save" from the
pop-up menu.
When "Print" is selected, printer output is enabled.
!9
Mic input button (*3)
Turns on/off the audio reception (hear audio from
the camera on a PC). This button will be displayed
only when "Mic input", "Interactive (full duplex)" or
"Interactive (half duplex)" is selected for "Audio
mode" on the setup menu.
( Setup Instructions)
When this button is clicked, the button will turn into
the
button and audio from the camera will not be
heard.
Audio volume can be adjusted (Low/Middle/High) by
moving the volume cursor
@0
Audio output button (*3)
Turns on/off the audio transmission (play audio from
the PC on the camera speaker). This button will be
displayed only when "Audio output", "Interactive (full
duplex)" or "Interactive (half duplex)" is selected for
"Audio mode" on the setup menu. ( Setup
Instructions)
The button blinks while the audio transmission is
being carried out except the case of setting to
"Interactive (full duplex)".
When this button is clicked, the button will turn into
the
button and audio from the PC will not be
heard.
Audio volume can be adjusted (Low/Middle/High) by
moving the volume cursor
Notes:
• When a user is using the audio transmission func-
tion with "Interactive (full duplex)" selected, the
receiver button and the transmission button will be
inoperable for the other users. When "Interactive (full
duplex)" is selected, the transmission button is inop-
erable for other users.
8
• Possible duration of audio transmission is up to 5
• When the camera is restarted, the adjusted volume
• Actual volume level will change in three steps even
@1
@2 Main area (*2)
.
Notes:
.
• When the displayed image is being zoomed in more
• When the mouse is dragged to move the camera
minutes per transmission. When 5 minutes have
passed, the audio transmission function will be can-
celed and the audio reception function will automati-
cally be turned on. To turn the audio transmission
function on, click the transmission button again.
level (for both the audio transmission and reception)
will return to the level that had been set on the
[Audio] tab on the setup menu.
( Setup Instructions)
though the volume cursor can be adjusted minutely.
SD recording status indicator
The status of the SD recording can be checked with
this indicator.
When the SD recording starts, this indicator will light
red. When the SD recording stops, this indicator will
go off.
This indicator will be displayed only when "Manual"
is selected for "Save trigger" on the setup menu.
( Setup Instructions)
Images from the camera will be displayed in this
area.
The current time and date will be displayed at the
selected position in the time and date format set on
the setup menu. ( Setup Instructions).
Click a desired point in the main area on the "Live"
page that is to be the center of the angle of view.
The camera moves to adjust the position in order to
set the clicked point as the center.
When selecting an area in the main area by drag-
ging the mouse, the selected area will be located at
the center of the main area.
In this case, the zoom ratio will be adjusted automat-
ically.
Zoom can be adjusted using the mouse wheel.
than 30x, the clicked point may not always be locat-
ed at the center of the main area.
beyond its operable range, the camera will move to
the requested direction and will stop at the end of
the operable range. Then, the zoom ratio of the dis-
played image will automatically be adjusted.