Olympus CK40M FRAME 수리 매뉴얼 - 페이지 35

{카테고리_이름} Olympus CK40M FRAME에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CK40M FRAME 38 페이지. Compact inverted metallurgical microscope

CK40M

Exit pupil center check

8-1

Set the following jigs as illustrated below to check the exit pupil center.

• Eyepiece------ KN0029: Centering telescope

• Objective ----- MDPlan5X

• Other --------- BKN0003: Standard tube

Make sure that the displacement between the center of the objective's exit pupil diameter and the

cross hairs center of centering telescope is within 15% of the objective's exit pupil diameter.

If the above requirement is not met, the MIRROR • is tilted (failure in installation) or defective.

C. REPAIR PROCEDURE

Mirror surface

C-14

Centering

telescope

(KN0029)

Standard tube

(BKN0003)

MDPlan5X

•