Olympus MX61L 조립 설명서 - 페이지 23

{카테고리_이름} Olympus MX61L에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus MX61L 49 페이지. 200mm/300mm compatible semiconductor/fpd inspection microscopes

Fig. 30

Setting the DIP Switches and

PRESET Switches

DIP Switch Setting (Fig. 30)

# Confirm the correct connections before proceeding.

}Set the main switch of the microscope to "

DIP switch @.

The DIP switch settings are read and entered at the moment the

microscope is turned ON.

# Be careful not touch the internal circuit boards when setting the DIP

switches. Otherwise, the internal circuitry may be damaged by static

electricity. Since the human body is charged with a small amount of

static electricity, discharge it from your body before proceeding to

the setup. This is done by lightly touching any metallic object.

Function

Revolving

nosepiece type

(Number of holes)

Aperture iris diaphragm

control button setting

Glare prevention during

objective switching

(Darkfield observation)

" (OFF) before setting the

Setting Result

U-D5BDREMC/P5REMC

OFF

U-D6REMC

Setting enabled.

Setting disabled.

Glare prevention

No glare prevention

MX61/MX61L

(Fig. 30)

DIP Switches

OFF

: Factory setup.