Epson C31C213A8941 사용자 설명서 - 페이지 44

{카테고리_이름} Epson C31C213A8941에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C31C213A8941 45 페이지. Tm printer driver

2) In some cases a serially-connected printer will not operate correctly on Windows 95 and Windows98 under the

default FIFO-buffer settings. You can correct the problem by reducing the FIFO Transmit Buffer setting for the

COM port to which the printer is connected.

3) In some cases a serially-connected printer will not operate correctly on Windows NT 4.0/Windows2000 while

FIFO buffering is enabled. You can correct the problem by disabling the FIFO buffer.

4) The top margin for receipts and journals will be larger than the top margin value that you set. The additional margin

is equal to the distance between the paper cut position and the top printable position.

5) Strike-though, italic, and other such attribute settings are ignored when printing with printer fonts. If you need to

use these attributes, you must select a Windows font.

6) Printer fonts will not printed the orientation is set to landscape. When using landscape orientation, be sure to select

a Windows font.

7) Although some printers provide red printer fonts, it is never possible to print both red characters and black

characters on the same line.

8) Although it is possible to print both a printer font and graphic data (Windows font, straight line, etc.) on the same

line, print results may be uneven.

9) Print results may also be uneven if you print a double-height font together with some other font on the same line.

10) If you find that you are unable to print barcodes on Windows NT4.0,Windows2000, you can correct the problem by

reducing the left margin to its lowest possible value.

11) Sometimes the barcode may not be able to print continuously in Windows NT4.0 and Windows2000. You should

specify HRI characters each time this problem occurs.

12) When changing the paper source with a paper-source selection character (special-function character), you must

place the character at the beginning of the line.

13) When printing by the serial connection to the TM printer of the high resolution, the print speed as the expectations

can not be gotten. To print out at higher speed, it recommends use in parallel connection.

14) When using TM printer in parallel interface, the paper empty error occurs when turning on the power in the

condition of the paper-near-end. it can not print. exchange to the new paper.

15) TM printer driver does not support printing of MICR.

16) Setting DIP switch 2-1 (the BUSY condition) of the TM printer to ON ( receive buffer full) is recommended.

17) When the old version of the TMUSB Port Monitor is already installed in Windows98, the new version of TMUSB

Port Monitor cannot be normally installed. In this case, delete all printer drivers in the printer window. Then, after

rebooting Windows98, install the TM printer driver.

18) When using WindowsNT4.0,Windows2000 English version in NTFS format, the users who don't have the

Administrator authority may not be able to print correctly. If so, please change the access of Everyone which is in

the directory of WindowsNT System folder\Spool\Printer to full control.

19) If either TM-U300/A/B/C/D or TM-U210A/AR/B/D is used on WindowsNT4.0,Windows2000, the color may not

be printed as you expected. If so, please print such as a space using the font in the color you expect first.

20) Driver EPSON DM-D10X/20X doesn't support DM-D202. Also, If TM printer doesn't work if it is connected with

TITLE

EPSON

TM Printer Driver

User's Manual

SHEET

REVISION

SHEET

1.61