Siemens ULTRAMAT 6F 사용 설명서 - 페이지 30

{카테고리_이름} Siemens ULTRAMAT 6F에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens ULTRAMAT 6F 49 페이지. Gas analyzer for the determination of ir-absorbing gases
Siemens ULTRAMAT 6F에 대해서도 마찬가지입니다: 추가 장비 매뉴얼 (20 페이지), 안전 매뉴얼 (24 페이지)

페이지 인쇄

5.2

Leak testing of containment system

5.2.1

Recommended test setup for CALOMAT 6F, CALOMAT 62F and OXYMAT 6F

2, 4

Connections of sample gas path

11, 12

Connection of reference gas (if present)

Blanking plug

Figure 5-1

Recommended test setup for CALOMAT 6F, CALOMAT 62F and OXYMAT 6F

Install the test setup as follows:

1. Close the sample gas outlet

2. If the analyzer has a reference gas connection, also close its inlet

3. Install a suitable shutoff valve (e.g. needle valve V1) of sufficient tightness into the sample gas line upstream of the

①

sample gas inlet

4. Connect a pressure regulator with a measuring range of 200 kPa (OXYMAT 6F) or 50 kPa (CALOMAT 6F) and a

resolution of 0.1 kPa upstream of the shutoff valve V1.

②

using a blanking plug.

Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0

Manometer (gauge pressure)

Pressure regulator

Shut-off valve (leak rate < 10

③

using a blanking plug.

kPa*l/s)

-6

A5E45779389002-01, 09/2018