Cisco Aironet 1240AG Series 빠른 시작 매뉴얼 - 페이지 20

{카테고리_이름} Cisco Aironet 1240AG Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1240AG Series 49 페이지. 802.11a/b/g access point
Cisco Aironet 1240AG Series에 대해서도 마찬가지입니다: 데이터시트 (10 페이지)

페이지 인쇄

Note

The Cisco part number for the serial cable is

AIR-CONCAB1200.

2. Set up a terminal emulator on your PC to communicate with the access

point. Use the following settings for the terminal emulator connection:

9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.

Assigning an IP Address Using the CLI

When you assign an IP address to the access point by using the CLI, you must

assign the address to the BVI. Beginning in a privileged EXEC mode, follow

these steps to assign an IP address to the access point BVI using the access

point console port.:

Command

Step 1

configure terminal

Step 2

Interface bvi1

Step 3

ip address address mask Assigns an IP address and subnet mask

Purpose

Enter global configuration mode.

Enters interface configuration mode

for the BVI.

address to the BVI.

OL-16714-01