Cisco Aironet 1240AG Series 빠른 시작 매뉴얼 - 페이지 40

{카테고리_이름} Cisco Aironet 1240AG Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1240AG Series 49 페이지. 802.11a/b/g access point
Cisco Aironet 1240AG Series에 대해서도 마찬가지입니다: 데이터시트 (10 페이지)

페이지 인쇄

Using the Express Security Page

Follow these steps to create an SSID using the Express Security page:

1. Type the SSID in the SSID entry field. The SSID can contain up to 32

alphanumeric characters.

Note

These characters are not allowed in the SSID: +, ], /, ", TAB,

and trailing SPACE.

2. To broadcast the SSID in the access point beacon, check the Broadcast

SSID in Beacon check box.

Note

When you broadcast the SSID, devices that do not specify an

SSID can associate to the access point. This is a useful option

for an SSID used by guests or client devices in public space. If

you do not broadcast the SSID, client devices cannot associate

to the access point unless their SSID matches this SSID, so

only one SSID can be included in the access point beacon.

3. (Optional) Check the Enable VLAN ID check box and enter a VLAN

number (1 through 4095) to assign the SSID to a VLAN. You cannot

assign an SSID to an existing VLAN.

OL-16714-01