Cisco Aironet 1240AG Series 빠른 시작 매뉴얼 - 페이지 45

{카테고리_이름} Cisco Aironet 1240AG Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1240AG Series 49 페이지. 802.11a/b/g access point
Cisco Aironet 1240AG Series에 대해서도 마찬가지입니다: 데이터시트 (10 페이지)

페이지 인쇄

WEP Keys

The WEP keys that you use to transmit data must be set up exactly the same

on your access point and any wireless devices with which it associates. For

example, if you set WEP Key 3 on your client adapter to 0987654321 and

select it as the transmit key, you must also set the same value for WEP Key 3

on the access point. However, the access point does not need to use WEP Key

3 as the transmit key.

Refer to the Cisco IOS Software Configuration Guide for Cisco Aironet

Access Points for instructions on setting the access point WEP keys.

Security Settings

Wireless devices attempting to authenticate with your access point must

support the same security options configured on the access point, such as

EAP or LEAP, MAC address authentication, Message Integrity Check (MIC)

WEP key hashing, and IEEE 802.1X versions.

If a wireless client cannot authenticate with your access point, contact the

system administrator for proper security settings in the client adapter and for

the client adapter driver and firmware versions that are compatible with the

access point settings.

Quick Start Guide Cisco Aironet 1240AG Series Access Point