Cisco TelePresence IX5200 설치 매뉴얼 - 페이지 12
{카테고리_이름} Cisco TelePresence IX5200에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5200 36 페이지.
Cisco TelePresence IX5200에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 최초 설정 (40 페이지)
페이지 인쇄
Installing the Lower and Upper Display Frames
5
Level the system end-to-end using a laser level. Use the diamond-shaped leveling marks as a guide for the
horizontal level. Note: When leveling the system, use the outside feet of the two outside display frames (Foot
A in the illustration) and both feet of the center display frame (Foot C in the illustration). Loosen the 19mm lock nut
on the leveling feet, and adjust the feet using the 13mm hex profile above each foot.
Systems using the seismic bracket only: Measure and center the frames, then place the seismic brackets under
the frames and mark the drilling holes. See the "Installing the Seismic Bracket" on page C-1 for more information.
Foot A
Page 2-6
© 2015 Cisco Systems, Inc. All rights reserved.
Diamond-shaped
leveling mark
Foot C
Foot B
19mm Lock nut
13mm hex profile
Foot B
Foot C
Foot A