Cisco TelePresence IX5200 Manual de instalação - Página 12
Procurar online ou descarregar pdf Manual de instalação para Sistema de conferência Cisco TelePresence IX5200. Cisco TelePresence IX5200 36 páginas.
Também para Cisco TelePresence IX5200: Manual do utilizador de início rápido (15 páginas), Manual do utilizador (26 páginas), Configuração pela primeira vez (40 páginas)
Imprimir página
Installing the Lower and Upper Display Frames
5
Level the system end-to-end using a laser level. Use the diamond-shaped leveling marks as a guide for the
horizontal level. Note: When leveling the system, use the outside feet of the two outside display frames (Foot
A in the illustration) and both feet of the center display frame (Foot C in the illustration). Loosen the 19mm lock nut
on the leveling feet, and adjust the feet using the 13mm hex profile above each foot.
Systems using the seismic bracket only: Measure and center the frames, then place the seismic brackets under
the frames and mark the drilling holes. See the "Installing the Seismic Bracket" on page C-1 for more information.
Foot A
Page 2-6
© 2015 Cisco Systems, Inc. All rights reserved.
Diamond-shaped
leveling mark
Foot C
Foot B
19mm Lock nut
13mm hex profile
Foot B
Foot C
Foot A