Cisco TelePresence IX5200 Installation Manual - Page 12
Browse online or download pdf Installation Manual for Conference System Cisco TelePresence IX5200. Cisco TelePresence IX5200 36 pages.
Also for Cisco TelePresence IX5200: Quick Start User Manual (15 pages), User Manual (26 pages), First-Time Setup (40 pages)
Print Page
Installing the Lower and Upper Display Frames
5
Level the system end-to-end using a laser level. Use the diamond-shaped leveling marks as a guide for the
horizontal level. Note: When leveling the system, use the outside feet of the two outside display frames (Foot
A in the illustration) and both feet of the center display frame (Foot C in the illustration). Loosen the 19mm lock nut
on the leveling feet, and adjust the feet using the 13mm hex profile above each foot.
Systems using the seismic bracket only: Measure and center the frames, then place the seismic brackets under
the frames and mark the drilling holes. See the "Installing the Seismic Bracket" on page C-1 for more information.
Foot A
Page 2-6
© 2015 Cisco Systems, Inc. All rights reserved.
Diamond-shaped
leveling mark
Foot C
Foot B
19mm Lock nut
13mm hex profile
Foot B
Foot C
Foot A