Cisco Gigabit Switch Router Cisco 12012 교체 지침 매뉴얼 - 페이지 13
{카테고리_이름} Cisco Gigabit Switch Router Cisco 12012에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Gigabit Switch Router Cisco 12012 34 페이지. Gigabit switch router cablemanagement
kit
Cisco Gigabit Switch Router Cisco 12012에 대해서도 마찬가지입니다: 교체 지침 매뉴얼 (6 페이지), 데이터시트 (9 페이지), 교체 지침 매뉴얼 (20 페이지), 설치 지침 매뉴얼 (14 페이지)
페이지 인쇄
Proceeding from left to right in the upper card cage, select a line card. Starting with the
Step 3
bottom port on the line card, disconnect the network interface cable from the bottom port
on the line card. (Refer to Figure 5a.)
Carefully remove the interface cable from the vertical cable-management bracket clips.
Step 4
(Refer to Figure 5b.)
Carefully remove the interface cable from the vertical cable-management bracket clip
Step 5
nearest the line card port. (Refer to Figure 5c.)
Figure 5
Removing the Interface Cables From a Line Card
Chassis
cable-management
tray
a
Line card
cable-management
bracket
Interface
cable
Carefully remove the interface cable from the horizontal cable-management tray and set
Step 6
the interface cable aside.
Repeat Step 3 through Step 6 for rest of the interface cables on that line card, then proceed to the
next line card in the upper card cage. Continue the procedure until you have disconnected and
removed all the line card interface cables from the cable-management system. Do not remove the
vertical cable-management bracket from the line card.
Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions
Removing and Replacing a Card Cage Assembly
b
Cable clip Cable clips
c
13