Cisco ASR 9000 Series 구성 매뉴얼 - 페이지 24

{카테고리_이름} Cisco ASR 9000 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 9000 Series 50 페이지. Line card
Cisco ASR 9000 Series에 대해서도 마찬가지입니다: 네트워크 설정 구성 (26 페이지), 구성 매뉴얼 (46 페이지), 매뉴얼 (24 페이지), 구성 (46 페이지), 매뉴얼 (44 페이지), 빠른 참조 매뉴얼 (7 페이지)

페이지 인쇄
Cisco ASR 9000 Series 구성 매뉴얼
How to Configure Serial Interfaces
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/0RP0RSP0/CPU0:router# configure
Step 2
interface serial interface-path-id
point-to-point
Example:
RP/0/0RP0RSP0/CPU0:router (config)# interface
serial 0/1/0/0.1
Step 3
ipv4 address ipv4_address/prefix
Example:
RP/0/0RP0RSP0/CPU0:router (config-subif)#ipv4
address 10.46.8.6/24
Step 4
pvc dlci
Example:
RP/0/0RP0RSP0/CPU0:router (config-subif)# pvc
20
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
522
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
Purpose
Enters global configuration mode.
.
Enters serial subinterface configuration mode.
subinterface
Assigns an IP address and subnet mask to the subinterface.
Creates a serial permanent virtual circuit (PVC) and enters
Frame Relay PVC configuration submode.
Replace dlci with a PVC identifier, in the range from 16 to
1007.
Note
Only one PVC is allowed per subinterface.
OL-26061-03