Cisco ASR 9000 Series Manual de configuração - Página 24
Procurar online ou descarregar pdf Manual de configuração para Porta de entrada Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 páginas. Line card
Também para Cisco ASR 9000 Series: Configuração das definições de rede (26 páginas), Manual de configuração (46 páginas), Manual (24 páginas), Configuração (46 páginas), Manual (44 páginas), Manual de referência rápida (7 páginas)
How to Configure Serial Interfaces
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/0RP0RSP0/CPU0:router# configure
Step 2
interface serial interface-path-id
point-to-point
Example:
RP/0/0RP0RSP0/CPU0:router (config)# interface
serial 0/1/0/0.1
Step 3
ipv4 address ipv4_address/prefix
Example:
RP/0/0RP0RSP0/CPU0:router (config-subif)#ipv4
address 10.46.8.6/24
Step 4
pvc dlci
Example:
RP/0/0RP0RSP0/CPU0:router (config-subif)# pvc
20
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
522
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
Purpose
Enters global configuration mode.
.
Enters serial subinterface configuration mode.
subinterface
Assigns an IP address and subnet mask to the subinterface.
Creates a serial permanent virtual circuit (PVC) and enters
Frame Relay PVC configuration submode.
Replace dlci with a PVC identifier, in the range from 16 to
1007.
Note
Only one PVC is allowed per subinterface.
OL-26061-03