Cisco ASR 9000 Series Manuel de configuration - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 pages. Line card
Également pour Cisco ASR 9000 Series : Configuration des paramètres du réseau (26 pages), Manuel de configuration (46 pages), Manuel (24 pages), Configuration (46 pages), Manuel (44 pages), Manuel de référence rapide (7 pages)

How to Configure Serial Interfaces

DETAILED STEPS

Command or Action

Step 1

configure

Example:

RP/0/0RP0RSP0/CPU0:router# configure

Step 2

interface serial interface-path-id

point-to-point

Example:

RP/0/0RP0RSP0/CPU0:router (config)# interface

serial 0/1/0/0.1

Step 3

ipv4 address ipv4_address/prefix

Example:

RP/0/0RP0RSP0/CPU0:router (config-subif)#ipv4

address 10.46.8.6/24

Step 4

pvc dlci

Example:

RP/0/0RP0RSP0/CPU0:router (config-subif)# pvc

Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide

522

Configuring Serial Interfaces on the Cisco ASR 9000 Series Router

Purpose

Enters global configuration mode.

Enters serial subinterface configuration mode.

subinterface

Assigns an IP address and subnet mask to the subinterface.

Creates a serial permanent virtual circuit (PVC) and enters

Frame Relay PVC configuration submode.

Replace dlci with a PVC identifier, in the range from 16 to

1007.

Note

Only one PVC is allowed per subinterface.

OL-26061-03