Cisco ASR 9000 Series Yapılandırma Kılavuzu - Sayfa 24

Ağ Geçidi Cisco ASR 9000 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco ASR 9000 Series 50 sayfaları. Line card
Ayrıca Cisco ASR 9000 Series için: Ağ Ayarlarını Yapılandırma (26 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Manuel (24 sayfalar), Yapılandırma (46 sayfalar), Manuel (44 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar)

How to Configure Serial Interfaces

DETAILED STEPS

Command or Action

Step 1

configure

Example:

RP/0/0RP0RSP0/CPU0:router# configure

Step 2

interface serial interface-path-id

point-to-point

Example:

RP/0/0RP0RSP0/CPU0:router (config)# interface

serial 0/1/0/0.1

Step 3

ipv4 address ipv4_address/prefix

Example:

RP/0/0RP0RSP0/CPU0:router (config-subif)#ipv4

address 10.46.8.6/24

Step 4

pvc dlci

Example:

RP/0/0RP0RSP0/CPU0:router (config-subif)# pvc

Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide

522

Configuring Serial Interfaces on the Cisco ASR 9000 Series Router

Purpose

Enters global configuration mode.

Enters serial subinterface configuration mode.

subinterface

Assigns an IP address and subnet mask to the subinterface.

Creates a serial permanent virtual circuit (PVC) and enters

Frame Relay PVC configuration submode.

Replace dlci with a PVC identifier, in the range from 16 to

1007.

Note

Only one PVC is allowed per subinterface.

OL-26061-03