Lenovo SE350 구성 및 설치 매뉴얼 - 페이지 7
{카테고리_이름} Lenovo SE350에 대한 구성 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo SE350 24 페이지. Toolless friction rail v2
Lenovo SE350에 대해서도 마찬가지입니다: 빠른 시작 (2 페이지), 매뉴얼 (12 페이지), 매뉴얼 (8 페이지)
페이지 인쇄
DIN Rail Configuration
This document provides important information for installing and removing the DIN rail configuration.
Install the DIN rail configuration
To install the DIN rail configuration, complete the following steps.
Note: Reserve 500 mm empty space in front of the node so that you can have sufficient space to install and remove the node.
1.
Install the two DIN rail clips to the power adapter bracket or the node sleeve depending on your configuration.
If you are installing the node sleeve without the power adapter bracket, complete the following steps.
Align the two DIN rail clips with the node sleeve.
Insert and tighten the four screws.
If you are installing the node sleeve with the power adapter bracket, complete the following steps.
Align the two DIN rail clips with the power adapter bracket.
Insert and tighten the four screws.
Note: You can install the DIN rail clips horizontally or vertically as below according to your DIN rail setting.
7