Nikon NR-5500 수리 매뉴얼 - 페이지 18

{카테고리_이름} Nikon NR-5500에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon NR-5500 25 페이지. Auto refractometer

TEST PROGRAM

TEST - OF: Initializing memory (EEPROM)

Press this

key to quit

TEST-OF.

♦ This test initializes the EEPROM that stores the model eye count tables and offset

values by storing their system standard values. This test must always be conducted

whenever the EEPROM is replaced with a new one.

* Accidental execution of this test will overwrite all existing data with standard

values, resulting in accuracy deterioration in any subsequent measurements.

• Initializing EEPROM

Press the measurement button, and the confirmation screen will appear.

[YES] key : Press this key after setting DIP switch No. 5 on the right side of the

main body to ON to start initializing the EEPROM.

When initialization is finished, ''SET DIP SW5 TO OFF" is

displayed.

Return DIP SW No.5 to the OFF position.

[NO] key : Press this key to cancel the initialization test.

The NR - 5500 will then quit TEST - OF.

[6-1 2]

Repair Manual