Cub Cadet 221 HP 운영자 매뉴얼 - 페이지 15
{카테고리_이름} Cub Cadet 221 HP에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet 221 HP 20 페이지. Single stage snow thrower
Cub Cadet 221 HP에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 사양 (2 페이지), 운영자 매뉴얼 (20 페이지)
페이지 인쇄
Troubleshooting
Problem
Excessive vibration
Snow thrower fails to self-
propel
Augers continue to rotate
Snow thrower fails to
discharge snow
Cause
1.
Loose parts or damaged auger.
1.
Auger control cable out of adjustment.
2.
Auger drive belt loose or damaged.
1.
Auger control cable out of adjustment.
1.
Chute assembly clogged.
2.
Foreign object lodged in auger.
3.
Auger control cable out of adjustment.
4.
Auger belt loose or damaged.
Remedy
1.
Stop engine immediately and disconnect
spark plug wire. Check for possible damage.
Tighten all bolts and nuts. Repair as needed.
If the problem persists, take snow thrower to
an authorized service dealer.
1.
Adjust auger control cable as shown in
Maintenance & Adjustments section.
2.
Replace auger drive belt.
1.
Adjust auger control cable as shown in
Maintenance & Adjustments section.
1.
Stop engine and disconnect spark plug wire.
Clean chute and inside of auger housing with
clean-out tool or stick.
2.
Stop engine immediately and disconnect the
spark plug wire. Remove object from auger.
3.
Adjust auger control cable.
4.
Replace auger belt.
8
15