Cub Cadet 221 HP 운영자 매뉴얼 - 페이지 9
{카테고리_이름} Cub Cadet 221 HP에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet 221 HP 20 페이지. Single stage snow thrower
Cub Cadet 221 HP에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 사양 (2 페이지), 운영자 매뉴얼 (20 페이지)
페이지 인쇄
Controls & Features
Chute Control Handle
Chute Assembly
Shave Plate
Auger
When engaged, the auger rotation draws snow into the auger
housing and throws it out the discharge chute. Rubber paddles
on the auger also aid in propelling the snow thrower as they
come in contact with the pavement.
Auger Control
Located on the upper handle, the auger control is used to
engage and disengage drive to the auger. Squeeze the control
against the upper handle to engage the auger; release it to
disengage.
EZ Chute
The rotation of the chute is controlled by rotating the chute
control handle left or right. The angle/distance that snow is
thrown is changed by manually tilting the upper chute to the
desired position.
Auger Control
Recoil Starter Handle
Auger
Figure 4-1
Shave Plate
The shave plate maintains contact with the pavement as
the snow thrower is propelled, allowing snow close to the
pavement's surface to be discharged.
Recoil Starter Handle
The recoil starter handle is used to manually start the engine.
4
9