Artiste E1 사용자 설명서 - 페이지 6
{카테고리_이름} Artiste E1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artiste E1 10 페이지. 2.4ghz wireless induction neck-loop headphone
페이지 인쇄
INSTALLATION
■
TRANSMITTER
1.
Connect the Power Adapter to the DC IN input Socket located on the transmitter rear panel.
2.
Connect the Power Adapter provided to an Electrical Outlet. Make sure the Power LED on the
Transmitter is ON.
3.
Connect the transmitter to your audio source.
4.
RCA Adapter Cable, Audio Cable, 6.3 mm to 3.5 mm Adapter Plug, External Microphone and
TOSLINK cable are provided for various type of connection to your Audio Source (e.g. TV
set, Hi-Fi system, MP3 or iPod).
5.
Please note that only one input (either audio input or optical input) must be connected.
The Green Power Indicator LED will blink as soon as you have connected the Power Adapter to the
Electrical Outlet, When the Audio Signal is detected from the Audio Source, and the Green LED
Indicator will glow constantly.
Note: When using Optical Cable connection, please set your audio devices/systems to PCM
Two-Channel (support 32KHZ—196KHZ). For details, please refer to the operation manual of
your audio devices/systems for the proper setting.