ASGCO U-Scrape 설치, 작동 및 유지보수 지침 - 페이지 5

{카테고리_이름} ASGCO U-Scrape에 대한 설치, 작동 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ASGCO U-Scrape 7 페이지. With bolt-up tensioner system

PROCEDURE

Mount the bolt-up brackets first. The mounting holes need to accept 1/2" bolts. You can install the bolt-

ups with the supplied hardware and leave the brackets hanging down just enough to install the spring

plates. Then tighten the bolt-ups down.

Step 1

Pre-assemble the spring hanger extension

brackets to the spring plates, and the bushing

adjusting brackets with supplied hardware

before hanging the bolt-up brkts.

Step 2

Hang the U-Scrape with its tube on the bush-

ing adj. angles, and slide on the 2 each tube

bushings.

Step 3

Next bolt into place the tube bushings using

the supplied hardware.

Spring Hanger

Extension

Bracket

Bolt-Up Bracket

U-Scrape with Tube

Tube Bushing

Bushing Adj. Angle

U-SCRAPE™ INSTALLATION

Spring Plates

Bolt-Up Bracket

Bushing Adj. Angle

Spring Plates

Bushing Adj. Angle

Tube Bushing

Bushing Adj. Angle

U-Scrape™