DoorHan PCB-SH Programming Instructions Manual - Page 11
Browse online or download pdf Programming Instructions Manual for Gate Opener DoorHan PCB-SH. DoorHan PCB-SH 14 pages. Control board
Also for DoorHan PCB-SH: Programming Instructions Manual (16 pages), Programming Instructions Manual (12 pages)
Print Page
Diagram of PCB-SH, traffic light and Lamp
2. PROGRAMMING OF REMOTE CONTROL PANELS
2.1. SELECTING THE OPERATING MODE
Selection of operating mode is by pressing of button "P". Number of clicks will correspond to number of selected operating
mode.
The «Program» indicator shows the selected operation mode, the number of flashes corresponds to the number of the
preset mode:
Operating
PROGRAM indicator
mode
flashes
1
1 time
2
2 times
3
3 times
4
4 times
5
5 times
NOTE:
•
It is recommended to use pulse operation mode for door closing (modes 2, 4, 5) only when safety photocells are
available.
•
It is possible to use an external radio receiver only in modes 4 or 5.
Gate opening
Pulse pressing of «Open» button
Pulse pressing of «Open» button»
Holding of «Open» button
Pulse pressing of «Open» button.
Stepped behaviour
(open–stop–close)
Pulse pressing of «Open» button.
Stepped behaviour
(open–stop–close)
Gate closing
Pulse pressing of «Close» button
Pulse pressing of «Close» button
Holding of «Close» button
Pulse pressing of «Close» button
Pulse pressing of «Close» button
DRIVE PROGRAMMING
Automatic closing
No
No
No
No
Yes
11