DoorHan PCB-SH Handleiding programmeerinstructies - Pagina 11

Blader online of download pdf Handleiding programmeerinstructies voor {categorie_naam} DoorHan PCB-SH. DoorHan PCB-SH 14 pagina's. Control board
Ook voor DoorHan PCB-SH: Handleiding programmeerinstructies (16 pagina's), Handleiding programmeerinstructies (12 pagina's)

Diagram of PCB-SH, traffic light and Lamp

2. PROGRAMMING OF REMOTE CONTROL PANELS

2.1. SELECTING THE OPERATING MODE

Selection of operating mode is by pressing of button "P". Number of clicks will correspond to number of selected operating

mode.

The «Program» indicator shows the selected operation mode, the number of flashes corresponds to the number of the

preset mode:

Operating

PROGRAM indicator

mode

flashes

1 time

2 times

3 times

4 times

5 times

NOTE:

•

It is recommended to use pulse operation mode for door closing (modes 2, 4, 5) only when safety photocells are

available.

•

It is possible to use an external radio receiver only in modes 4 or 5.

Gate opening

Pulse pressing of «Open» button

Pulse pressing of «Open» button»

Holding of «Open» button

Pulse pressing of «Open» button.

Stepped behaviour

(open–stop–close)

Pulse pressing of «Open» button.

Stepped behaviour

(open–stop–close)

Gate closing

Pulse pressing of «Close» button

Holding of «Close» button

Pulse pressing of «Close» button

DRIVE PROGRAMMING

Automatic closing

Yes