Drummond MTL10 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Test Equipment Drummond MTL10. Drummond MTL10 5 pages. Test lamps
Also for Drummond MTL10: Instruction Manual (5 pages), Instruction Manual (20 pages), Instruction Manual (5 pages)

Print Page

4. MAINTENANCE

4.1 Probe Replacement

If the test prods become damaged they should be replaced.

Replacement prods are available as spare items:

Straight prod (DRUMTL2104)

L-shaped prod (DRUMTL2105)

Contact your local distributor or contact Martindale Electric on

01923 441717 or email [email protected].

4.2 Periodic Testing

To maintain the integrity of the voltage indicator, Martindale Electric

recommends that it is returned at least once a year to verify physical

integrity, electrical speciﬁ cation and insulation integrity.

Martindale Electric is pleased to offer you this service. Please contact

our Service Department for details.

Email: [email protected]

Tel: 01923 650660

4.3 Cleaning

Warning

To reduce the risk of surface leakage, this instrument must be kept in

a clean condition.

Warning

Prior to cleaning, ensure that the instrument is disconnected from any

voltage source.

Wipe the voltage detector with a cloth soaked with alcohol or mild

non-conductive detergent. Particular attention should be paid to all

areas forward of the ﬁ nger guards. Do not use abrasives, abrasive

5. WARRANTY AND LIMITATION OF LIABILITY

This Martindale product is warranted to be free from defects in

material and workmanship under normal use and service. The

warranty period is 2 years and begins on the date of receipt by the

end user. This warranty extends only to the original buyer or end-

user customer, and does not apply to fuses, disposable batteries,

test leads or to any product which, in Martindale's opinion, has been

misused, altered, neglected, contaminated, or damaged by accident

or abnormal conditions of operation, handling or storage.

Martindale authorised resellers shall extend this warranty on new

and unused products to end-user customers only but have no

authority to extend a greater or different warranty on behalf of

Martindale.

Martindale's warranty obligation is limited, at Martindale's option, to

refund of the purchase price, free of charge repair, or replacement

of a defective product which is returned to Martindale within the

warranty period.

This warranty is the buyer's sole and exclusive remedy and is in

lieu of all other warranties, expressed or implied, including but not

limited to any implied warranty of merchantability or ﬁ tness for a

particular purpose. Martindale shall not be liable for any special,

indirect, incidental or consequential damages or losses, including

loss of data, arising from any cause or theory.

Since some jurisdictions do not allow limitation of the term of

an implied warranty, or exclusion or limitation of incidental or

consequential damages, the limitations and exclusions of this

warranty may not apply to every buyer. If any part of any provision

of this warranty is held invalid or unenforceable by a court or other

decision-maker of competent jurisdiction, such holding will not affect

solvents or detergents which can cause damage to the voltage

detector. Allow the voltage detector to thoroughly dry before use.

4.4 Repair and Service

There are no serviceable parts in this unit. The MTL10 and MTL20

are sealed units and must not be opened for any reason.

4.5 Storage Conditions

The instrument should be kept in cool, dry conditions and not

subjected to shock, scratching or other damage, prolonged direct

harsh sunlight, extremes of temperature and in such a manner as

to preserve the working life of the unit. It is strongly advised that the

unit is not kept in a tool box where other tools may damage it.

05/12/2013 11:31:07

MTL10 MTL20 instructions rev8.indd 7

the validity or enforceability of any other provision or other part of

that provision.

Nothing in this statement reduces your statutory rights.

05/12/2013 11:31:07