Bender LIM2000plus LIM2000-1CB Operating Manual - Page 3
Browse online or download pdf Operating Manual for Monitor Bender LIM2000plus LIM2000-1CB. Bender LIM2000plus LIM2000-1CB 12 pages. Line isolation monitor
Print Page
4
1. Safety Information
1.1 Intended use
The Line Isolation Monitor (LIM) calculates the total hazard
current in a single phase or three phase isolated power
system. This is the maximum current that could flow through
a person who made contact between an isolated conductor
and ground.
Two seperate ground connections are provided for added safety
when wiring the LIM into an isolated power system. Each ground
should be wired individually to the reference grounding bus. A break
in either connection will cause the LIM to alarm (flashing red LED).
Any other use, or any use beyond the foregoing, is deemed to be
improper. The BENDER companies shall not be liable for any loss
and damaging arising therefrom.
Correct use also includes
•
compliance with all instructions from the operating manual
•
adherence to any inspection intervals.
As a basic principle, our "General conditions of Sale and Delivery"
shall apply. These are available to the operator not later than the
time when the contract is concluded.
1.2 Warranty and liability
Warranty and liability claims in the event of injury to persons or
damage to property are excluded if they can be attributed to one or
more of the following causes:
•
Improper use of the LIM.
•
Improper assembly/fitting, commissioning, operation and
maintenance of the LIM.
•
Failure to take note of the operating instructions concerning
transportation, commissioning, operation and maintenance of
the LIM.
•
Unauthorized structural modifications to the LIM.
•
Failure to take note of the technical data.
5