Dell EMC Integrated Data Protection Appliance DP4400 Hardware Installation Manual - Page 16
Browse online or download pdf Hardware Installation Manual for Storage Dell EMC Integrated Data Protection Appliance DP4400. Dell EMC Integrated Data Protection Appliance DP4400 18 pages. Emc integrated data protection appliance
Print Page
- 1. Table of Contents
- 2. Installation Overview
- 3. Prepare the Site and Unpack the System
- 4. Install Network Validation Tool
- 5. Install the Rails
- 6. Secure the Rails to the Cabinet
- 7. Install the System in the Cabinet
- 8. Install the Bezel
- 9. Connect the System to the Network
- 10. Connect the Power Cables and Power on
- 11. Configure Idrac
- 12. Installing the Dataprotection-ACM Pre-Installation Patch
- 13. Launch the Appliance Configuration Manager
- 14. Additional Resources
Hardware Installation Guide
Launch the Appliance Configuration Manager
Additional resources
Document references for IDPA
Integrated Data Protection Appliance DP4400 2.4 Hardware Installation Guide
16
remove failed: No such file or directory"
"warning: file /usr/local/dataprotection/customscripts/
Config.properties: remove failed: No such file or
directory"
11. Verify that the pre-installation patch installation completed successfully by
typing the following command:
rpm -qa | grep dataprotection
Ensure that the DataProtection-ACM version is
571095.x86_64 or later.
12. Delete the Idpa_pre_update_N.N.N.nnnnnn.tar.gz file, and then delete
the /tmp/patch/Idpa_pre_update_N.N.N.nnnnnn directory.
13. Edit the /usr/local/dataprotection/server/version/
applianceVersion.xml file and modify value in the <build> tag to the latest
build for the ACM and IDPA nodes.
The following example highlights the changes that you must make to the
<build> tag. In this example, the build number is 571095.
<applianceVersion>
<id>IDPA</id>
<version>
<major>2</major>
<subMajor>0</subMajor>
<minor>0</minor>
<build>571095</build>
</version>
<components>
<component>
<id>ACM</id>
<version>
</version>
</component>
Launch the Appliance Configuration Manager to complete the initial network
configuration. The Appliance Configuration Manager (ACM) walks you through the
steps to configure network settings, license the IDPA software, and configure the
IDPA.
To continue configuring the IDPA with the ACM, refer to the Integrated Data
Protection Appliance DP4400 Getting Started Guide . This document explains common
user tasks such as how to create backup policies and restore from backup.
The IDPA documentation set includes the following publications:
<major>1</major>
<subMajor>0</subMajor>
<minor>0</minor>
<build>571095</build>
dataprotection-2.0.0-