HP ProCurve 1600M Installation Manual - Page 8

Browse online or download pdf Installation Manual for Switch HP ProCurve 1600M. HP ProCurve 1600M 12 pages. Redundant power supply
Also for HP ProCurve 1600M: Specification Sheet (12 pages), Read Me First (8 pages), Reviewer's Manual (27 pages), Supplementary Manual (2 pages), Supplementary Manual (2 pages), Installation Manual (28 pages), Installation Manual (36 pages), Installation Manual (28 pages), Quick Setup Manual (2 pages), Quick Setup Manual (4 pages), User Manual (8 pages), Manual Supplement (28 pages), Read Me First (16 pages), Installation And Removal (2 pages), Planning And Implementation Manual (40 pages), Product End-Of-Life Disassembly Instructions (2 pages), Installation Manual (46 pages), Diagnostics Manual (2 pages), Disassembly Instructions (2 pages)

Print Page
HP ProCurve 1600M Installation Manual
b. Install and tighten the two screws that hold the fan tray in place. (Make sure
you do not overtighten the screws.).
Caution: Make sure you do not leave any loose screws or other
foreign material inside the chassis.
c. From the front of the switch, reach into the opening made by the removed
modules and connect the fan tray cable to the white 9-pin connector on the
switch mother board by pressing it straight onto the connector, all the way in
until it stops.
The cable connector aligns with the top and left side of the large management
module edge connector, as shown in the illustration.
Align the fan tray cable connector
with the corner of the large connector
on the switch board. Then press the
cable connector straight onto the
white 9-pin connector in that location.
Tighten the two screws
just until they are snug.
8