Cisco 9124 - mds multilayer fabric switch Hardware Installation Manual - Page 13

Browse online or download pdf Hardware Installation Manual for Switch Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 36 pages. Mds 9000 series
Also for Cisco 9124 - mds multilayer fabric switch: Specifications (2 pages), Datasheet (9 pages), Specifications (3 pages), Configuration Manual (49 pages), Release Note (48 pages), Release Note (44 pages), Release Note (36 pages), Release Note (22 pages), Release Note (3 pages), Release Note (40 pages), Manual (16 pages)

Print Page

Chapter 2

Installing the Cisco MDS 9100 Series

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or

Greater of Rail Spacings

The front rack-mount brackets for the Cisco MDS 9100 Series switch must be installed onto the switch

prior to installing the switch into the cabinet. Follow these steps for cabinets with front-mounting rail to

rear-mounting rail spacings greater or equal to 26 inches.

Install the front rack-mount brackets as follows:

Step 1

Install the C brackets as follows:

Step 2

Note

Figure 2-8

OL-21514-01

Position one of the front rack-mount brackets against the side of the switch and align the screw holes

as shown in

Figure

2-8. Then attach the bracket to the switch with the three M4 screws originally

provided with the bracket.

Repeat with the other front-rack mount bracket on the other side of the switch.

Two C brackets are shipped preinstalled on the switch, using three M3 screws per bracket. This

installation step is only necessary if the C brackets were removed.

Position one of the C brackets against the side of the switch and align the screw holes as shown in

Figure

2-8. Then attach the bracket to the switch with the three M3 screws originally provided with

the bracket.

Repeat with the other C bracket on the other side of the switch.

Front Rack-Mount Brackets and C Brackets Installed on the Cisco MDS 9100 Series

Front rack-mount bracket

Installing the Switch in a Cabinet with Insufficient Front Clearance

C bracket

Cisco MDS 9100 Series Hardware Installation Guide

2-13