Clarke PSV1A Operation & Maintenance Instructions Manual - Page 10

Browse online or download pdf Operation & Maintenance Instructions Manual for Water Pump Clarke PSV1A. Clarke PSV1A 11 pages. Dirty water pump

Print Page

CLEANING AND MAINTENANCE

MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY

BEFORE CLEANING, OR PERFORMING ANY MAINTENANCE.

•

These pumps should require no maintenance other than regular cleaning. If the

pump starts to show signs of wear or damage, contact your CLARKE dealer for

advice.

•

Do not attempt to repair the pump yourself, repairs must be carried out by your

CLARKE dealer, or contact the CLARKE Service Department, on 020 8988 7400.

•

Check the pump regularly to ensure the base is clear of leaves or other debris.

Replacing the Impeller

Pull off the base cover.

Remove the 3 screws on the base of the pump, and remove the cover.

Use a small flat headed screwdriver to remove the circlip.

Remove the impeller from the shaft.

Replace with a new impeller and lock it in place using the circlip.

Replace the base and use the 3 screws to secure. and push on the base cover.

WARNING!

Circlip