Clarke PSV1A Інструкція з експлуатації та технічного обслуговування - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Водяний насос Clarke PSV1A. Clarke PSV1A 11 сторінок. Dirty water pump
Друкувати сторінку
CLEANING AND MAINTENANCE
MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY
BEFORE CLEANING, OR PERFORMING ANY MAINTENANCE.
•
These pumps should require no maintenance other than regular cleaning. If the
pump starts to show signs of wear or damage, contact your CLARKE dealer for
advice.
•
Do not attempt to repair the pump yourself, repairs must be carried out by your
CLARKE dealer, or contact the CLARKE Service Department, on 020 8988 7400.
•
Check the pump regularly to ensure the base is clear of leaves or other debris.
Replacing the Impeller
1
Pull off the base cover.
2
Remove the 3 screws on the base of the pump, and remove the cover.
3
Use a small flat headed screwdriver to remove the circlip.
4
Remove the impeller from the shaft.
5
Replace with a new impeller and lock it in place using the circlip.
6
Replace the base and use the 3 screws to secure. and push on the base cover.
1
3
WARNING!
2
4
Circlip
10