Clarke PSV1A Handleiding voor bediening en onderhoud - Pagina 10

Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke PSV1A. Clarke PSV1A 11 pagina's. Dirty water pump

CLEANING AND MAINTENANCE

MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY

BEFORE CLEANING, OR PERFORMING ANY MAINTENANCE.

•

These pumps should require no maintenance other than regular cleaning. If the

pump starts to show signs of wear or damage, contact your CLARKE dealer for

advice.

•

Do not attempt to repair the pump yourself, repairs must be carried out by your

CLARKE dealer, or contact the CLARKE Service Department, on 020 8988 7400.

•

Check the pump regularly to ensure the base is clear of leaves or other debris.

Replacing the Impeller

Pull off the base cover.

Remove the 3 screws on the base of the pump, and remove the cover.

Use a small flat headed screwdriver to remove the circlip.

Remove the impeller from the shaft.

Replace with a new impeller and lock it in place using the circlip.

Replace the base and use the 3 screws to secure. and push on the base cover.

WARNING!

Circlip